NOTE: Login for this store is separate than the Forum Login.
You must register for the Store and the Forum separately.

Login Here


Body Shop
Metal Working Tools
Working With Fillers
Rust Coatings & Converters
Plastic Repair Materials
Pushing
Pulling
Joint and Seam Sealers
Body Shop Helpers
Mechanical Tools
Paint Shop
General Shop Tools
Videos
Specials!
Return Policy
Contact Information
International Shipping Policy
Supporting Friends

Joint and Seam Sealers

These products vary widely in their price application and longevity. Some are needed for certain applications but for the most part you are going to get what you pay for.

Joint and Seam Sealers




<b>Fusor (one component) Seam Sealers $18.40</b> Fusor (one component) Seam Sealers $18.40
Code: FUSSS
Price: $0.00
Quantity in Basket: none
Lord Fusor
LORD Fusor High Definition (HD) Seam Sealers

• Permanently maintains a high definition appearance, matching OEM quality and look
• Duplicates all OEM beadable, brushable and sprayable seam sealers, wheelhouse and sound dampening pads
• Makes use of Silane Terminated Polymer (STP) Technology, and have been recommended by both Chrysler and GM
• Can be spray applied or applied with a manual caulk gun
• Fusor HD Sealers meet SAE J400 Chip Resistance testing and are approved to replace underbody coatings on Chrysler vehicles
 
 



<b>Fusor (two part) Self Leveling Seam Sealer  - Large - 10.1 oz. (300ml.)</b> Fusor (two part) Self Leveling Seam Sealer - Large - 10.1 oz. (300ml.)
Code: FUS122EZ
Price: $44.20
Quantity in Basket: none
This is the Large - 10.1 oz. (300ml.). Can be used over fully cured acid-etchprimers, urethane primers and epoxy primers. Used for matching factory, flow-grade seams on drip rails, trunks, core support to aprons, roof seams and quarter panel to rear deck. Fast set with no tooling needed.
 
 



<B>Fusor (two part) "Fast Set" Seam Sealer 10.1 oz. Fusor (two part) "Fast Set" Seam Sealer 10.1 oz.
Code: FUS123
Price: $44.20
Quantity in Basket: none
Substrates:
Can be used over epoxy and urethane primers

Applications:
Duplicating factory look on standing seams, cosmetic seams, truck bed seams, tooled door skin seams, floor pan seams, core support seams and any other application in which a non-sag cosmetic seam sealer is required.
Sets in 10 minutes
Use with FUS301 or FUS304 Gun

 
 



<B>Fusor (two part) "Fast Set" Seam Sealer 1.7 oz. Fusor (two part) "Fast Set" Seam Sealer 1.7 oz.
Code: FUS126
Price: $19.50
Quantity in Basket: none
Same material as FUS123 above but in smaller amount.
Can be used with either the FUS300 Dispensor or
the FUS513b Caulk gun conversion kit.
 
 



<B>Fusor (two part) "Medium Set" Seam Sealer 10 oz. Fusor (two part) "Medium Set" Seam Sealer 10 oz.
Code: FUS123EZ
Price: $44.20
Quantity in Basket: none
Substrates:
Can be used over fully cured acid-etch primers, urethane primers and epoxy primers.

Applications:
Duplicating factory appearance of standing seams, cosmetic seams, truck bed seams, tooled door skin seams, floor pan seams, core support seams and any other application in which a non-sag cosmetic seam sealer is required

Easy to dispense, non-sag formula
Longer open time allows for cosmetic perfection whether tooling or brushing

Use FUS310 or FUS304 Dispenser

 
 



<B>Fusor (two part) "Medium Set" Seam Sealer 1.7 oz. Fusor (two part) "Medium Set" Seam Sealer 1.7 oz.
Code: FUS126EZ
Price: $19.50
Quantity in Basket: none
Same as FUS123EZ but smaller amount.

Use with the FUS300 or FUS513 dispensers.

 
 



Fusor Bare Metal Seam Sealer Fusor Bare Metal Seam Sealer
Code: FUS019
Price: $42.88
Quantity in Basket: none
• Unique acrylic formula bonds directly to bare metal • Fast cure formula cures over 20 times faster than ordinary, brushable seam sealers speeding production throughput • Proprietary color changing formula tells you when the product is curing properly and ready for painting • Saves costly time and materials eliminating the need to prime before sealing
• Paintable immediately after application with no need to wait for sealer to cure
• Contains phosphatizing agents, which protect metal from corrosion with no special primers or pre-treatment necessary
• Outstanding environmental resistance to UV exposure, salt spray and weathering
• Perfectly matches hard-to-match OEM brush seams
• Holds brush marks with no sagging
• Applications: Rear Body Panels, Tail Light Pockets, Under Hood Area, Aprons, Strut Towers, Core Supports, Floor Pan Areas
• Work Time, minutes @ 70 F: 6-8
• Part Paintability, minutes @ 70 F: Immediately
 
 



<B>Fusor Mixing Tips Fusor Mixing Tips
Code: FUSa
Price: $0.00
Quantity in Basket: none
Extra mixing tips for small 50m and large tubes. Click on picture to pick sizes.
 
 



<b>Fusor Small Manual Dispenser Gun #300</b> Fusor Small Manual Dispenser Gun #300
Code: FUS300R
Price: $38.45
Quantity in Basket: none
2:1 and 1:1 Plungers are included Sturdy, High Quality, Compact For use with small 50ml cartridge
 
 



<B>Caulk Gun Conversion Kit Caulk Gun Conversion Kit
Code: DSSXSMAPTb
Price: $6.50
Quantity in Basket: none
If you only have occasional use for the SMALL 50ml seam sealer (or plastic repair materials) you don't need to purchase a more expensive dispensor gun because this caulk gun conversion kit will do the job when used with a standard caulk gun.
 
 



<b>Fusor Large Manual Dispenser Gun</b> Fusor Large Manual Dispenser Gun
Code: FUS301
Price: $49.50
Quantity in Basket: none
Dispenses 1:1 and 2:2 cartridges with easy conversion Features tempered, built_in nozzle cutter for easy controlled custom bead sizing.
 
 



<b>Pneumatic Dispensing Gun (300 ml cartridge)</b> Pneumatic Dispensing Gun (300 ml cartridge)
Code: FUS304
Price: $210.73
Quantity in Basket: none
Pre-configured to dispense 300 ml 1:1 cartridges Conversion kit to enable dispensing of 225 ml 2:1 For fast easy application of long beads
 
 



<B>3M Strip-Caulk 3M Strip-Caulk
Code: 3M8578
Price: $20.20
Quantity in Basket: none
Soft, Non-hardening, black caulking material in one-foot lengths for use in all types of seams, joins and openings.
*Easily thumbed into place and smoothed with finger.
*May be painted immediately. *Has non-sag consistency for vertical and overhead applications.
*No shrinkage
*Adheres to metal, paint, glass and rubber.
*Waterproof
*Will not crack or dry out.
 
 



<B>Sprayable Seam Sealer and Coating Gun</B> Sprayable Seam Sealer and Coating Gun
Code: FUS312
Price: $159.72
Quantity in Basket: none
This is a great tool for applying a coating of sealer over a large area and also for applying a bead of sealer in different configurations. You can also apply textured sealer to a wheelhouse or other panels as a sound deadener or you can add a paintable texture to help protect rockers and other low areas of a vehicle.
 
 



<B>Fusor Sprayable Seam Sealer Fusor Sprayable Seam Sealer
Code: FUS804
Price: $17.50
Quantity in Basket: none
Use Fusor 804 with Fusor gun #312
 
 



<B>Evercoat Self-Leveling Seam Sealer Evercoat Self-Leveling Seam Sealer
Code: E824
Price: $34.95
Quantity in Basket: none
Large 250ml tube of two part seam sealer. Can be used with standard caulk gun. Comes with two mixing tips.
 
 



<B>Extra Mixing Tip for Evercoat Seam Sealer Extra Mixing Tip for Evercoat Seam Sealer
Code: E817
Price: $2.50
Quantity in Basket: none
Extra mixing tips allow you to use a single tube for many applications.
 
 



Seam Sealer Tape 7/8" X 30' Seam Sealer Tape 7/8" X 30'
Code: 3M8476
Price: $25.50
Quantity in Basket: none
Rubber backed, 20.0 mil thick tape designed to duplicate the factory appearance and function typically found in door jams and trunk gutters. Immediately paintable.
 
 



3M Rust Protection Combo 3M Rust Protection Combo
Code: 3Mshutz
Price: $0.00
Quantity in Basket: none
Tube provides a reusable, inexpensive means of applying 3M Rust Fighter-I (Quarts) into hard to reach areas. This is a 36 inch flexible tube that has a patented tip which provides a 360 degree or 180 degree spray pattern.

Shutz gun provides a unique, convenient and inexpensive means for spraying 3M Rubberized Body Schutz

Quart of black, rubberized, protective coating developed primarily for use as a sound deadener, protective coating, and underseal. Bonds to a wide variety of surfaces.

 
 



Fusor Acoustical Foam Fusor Acoustical Foam
Code: FUS130
Price: $45.50
Quantity in Basket: none
• A fast curing, two-component NVH product that matches the look and performance of OEM foam and reduces repair cycle times.
• Matches OEM sound deadening foams commonly found in pillars, front rails, rockers, and rear supports
• Provides NVH properties for a quieter ride
• Tough compressive strength for maximum energy absorption
• Super fast application, providing full foam expansion in 3 minutes
 
 



3M  Automix™ Flexible Foam 3M Automix™ Flexible Foam
Code: 3M8463
Price: $44.20
Quantity in Basket: none
Two part urethane which foams in place; designed to replace flexible foams found in OEM applications such as trunks, door cavities, door skins, roof beams, etc
 
 



Fusor Direct-To-Metal Seam Sealer $16.50 Fusor Direct-To-Metal Seam Sealer $16.50
Code: FUSDTM
Price: $0.00
Quantity in Basket: none
• Single component direct-to-metal
• Skins in 25 minutes or less
• Reduces touch time
• Paint immediately or up to 30 days
• Reduces cycle time
• Use to bond trim parts
• Non-sag / Superior adhesive strength for trim bonding
• Easy to tool
• Holds brush marks without die back
• Duplicates all types of OEM seams
• 500% Elongation
• Easy to dispense
• Weld thru with no burn back