|
 | Astro's Best Spot Weld Drill
Code:AP1756W
Price:
$244.80
Quantity in Basket: none
|
• • Adjustable depth stop which allows you to drill out just the spot weld and not the panel beneath
• Drill bit removes the entire spot weld, eliminating the need for grinding
• Kit includes:
Air Spot Weld Drill
5.5" Deep Clamp
4 - Drill Bits (2-8mm, 2-6.5mm)
End Line Oiler (3000)
3 Way Swivel (3SB10)
Plastic Blow Molded Case |
|
|
|
|
 | Chicago Pneumatic CP-875 Die Grinder
Code:CP875W
Price:
$59.95
Quantity in Basket: none
|
| This Chicago Pneumatic CP-875 Die Grinder is a must for anyone planning on working with sheet metal or with rusty bolts or any application where you need a rugged tool to do the hard cutting for you. Used in combination with 3" Cut Off Disks or Grinding Disks this can be a daily workhorse.
|
|
|
|
|
 | ATD Cut Off Tool with Guard
Code:ATD2139a
Price:
$31.95
Quantity in Basket: none
|
• Great for Cutting & Trimming Bolts, Nuts, Brackets, Pipes, etc.
• Compact Design Allows Access in Confined Areas
• Free Speed: 20,000 RPM
• Average Air Consumption: 4.5 CFM
• Inlet: ¼” NPT(f)
• Length: 7.3”
• Weight: 2.8lbs |
|
|
|
|
 | Norton High Quality 3" Cut-Off Wheels (5 per pkg)
(click here for options)
Code:CTOW
Price:
$0.00
Quantity in Basket: none
|
| One of the best tools for cutting steel is also one of the handyest for V-ing out cracks in fiberglass. All "cut off discs" are NOT created equal and the Norton Medallion has been the one used in my shop since I discovered it. One disc can outlast many other lower quality discs. You get more for your money with this product than with lower priced disks.
These 3 inch discs come in packs of 5. Thinner disks don't last as long but give a more narrow and accurate cut.
|
|
|
|
|
 | ATD Inexpensive 3" Cut Off Disks
Code:ATDCUTOFF
Price:
$0.00
Quantity in Basket: none
|
| Good quality 3" cut off disks. Click picture for options. |
|
|
|
|
 | IR Air Hammer & Chisel Set
Code:IR116KW
Price:
$65.50
Quantity in Basket: none
|
• The economical air hammer for fast cutting action especially for medium exhaust work, panel cutting, and general repair work
• Up to 3,500 blows per minute
• Handles a range of cutting applications
• Longer life alloyed steel barrel and heat-treated piston
• Chisel set includes edging tool, tail pipe cutter, straight cutter, cutting chisel and a punch
Air Hammer Specifications:
Shank opening: .401" (10.1 mm)
Blows per minute @ 90 psi: 3500
Bore diameter: 11/16" (17.5 mm)
Stroke length: 2-5/8" (67 mm)
Weight: 3.4 lb. (1.54 kg)
Length: 7.8" (198 mm)
Average air consumption: 3 cfm, 15 cfm @ load
Sound (pressure/power): 104.4/117.4 dBA
Air inlet: 1/4"
|
|
|
|
|
 | Oldforge Pneumatic Panel Cutter (new #31958)
Code:OLD1958W
Price:
$16.03
Quantity in Basket: none
|
| This tool leaves a clean, smooth edge with the cut curling up through the slot in the middle. |
|
|
|
|
 | Old Forge Cold Chisel
Code:OFCC
Price:
$0.00
Quantity in Basket: none
|
| Designed to cut bolts, nuts, tees, angles and frame members. Every technician will find dozens of uses for this tool. Remember, all Oldforge pneumatic tools are warranted for life. |
|
|
|
|
 | Oldforge Pneumatic Scraper (new #31976)
Code:OLD1976W
Price:
$11.35
Quantity in Basket: none
|
| Removes gaskets, rust, undercoating, paint, floor tile, plaster and roof coatings with ease. The blade is 1-1/8" wide. 8" long and offset for hand clearance. |
|
|
|
|
 | Oldforge Pneumatic Taper Punch (new # 31979
Code:OLD1979W
Price:
$9.95
Quantity in Basket: none
|
| Use for peening and crimping, driving rivets and hinge pins. 3/8" diameter. |
|
|
|
|
 | Oldforge Pneumatic Hammer
Code:OLD1981W
Price:
$12.72
Quantity in Basket: none
|
| Excellent for hammering operations such as U-joints, ball joint and body forming work. Length 3 1/2". |
|
|
|
|
 | Old Forge Pneumatic 9 pc.Tool Set
Code:OLD7322W
Price:
$79.84
Quantity in Basket: none
|
| A complete assortment of Pneumatic Tools to handle many different problems encountered by the technician. Packaged in a leatherette pouch.
Includes: Body Ripper, Panel Cutter, Slotted Style Panel Cutter, Sheet Metal Trimmer, Muffler-Tailpipe Remover, Splitting Tool, 6" Cold Chisel, Rivet and Bolt Cutter and Taper Punch with 1/8" Point. |
|
|
|
|
 | Ingersol-Rand Pneumatic Nibbler
Code:IR325
Price:
$147.75
Quantity in Basket: none
|
| At home with intricate curves on flat or corrugated metal, one hand is all it takes to make perfect cuts. Variable speed pneumatic up to 2500 RPM--and a well balanced grip make it easy for anyone to operate. |
|
|
|
|
 | Cut-Off Disk Holder (Arbor)
Code:AES3804
Price:
$6.50
Quantity in Basket: none
|
| For attaching cut off disk to angle/die grinder or drill |
|
|
|
|
 | Wivco Spot Weld Remover Bits
Code:WSWRB
Price:
$0.00
Quantity in Basket: none
|
| Use these spot weld bits with a little oil in a slow electric drill for best results. This is one of the least expensive and best ways to remove spot welds and only have a small pilot hole in the remaining panel. |
|
|
|
|
 | Astro Straight Punch/Flange Air Tool
Code:AP600ST8
Price:
$87.50
Quantity in Basket: none
|
• 5/16" punch
• Performs hole punching and panel crimping
• Features a rotating head for convenient use
• Precise control - every pull of the lever delivers a single punch or a single flange crimp
• Forms an offset crimped edge on sheet metals for no-bump lap welds
• Lightweight, yet ruggedly built
• Cuts metal fabrication time in half
|
|
|
|
|
 | Ingersol Rand Super Duty Mini Reciprocating Saw
Code:IR4429
Price:
$124.75
Quantity in Basket: none
|
• Improved ergonomics and performance
• Piped away exhaust hose
• Adjustable guide for more precise control
Specifications:
Strokes per minute: 5,750
Weight: 1.63 lbs. (.74 kg)
Length w/o blade: 9.25" (235 mm)
Average air consumption: 7 cfm, @ load 7 cfm
Sound (pressure/power): 69.2/82.2 dBA
Air inlet: 1/4"
|
|
|
|
|
 | Astro Mini Air Reciprocating Saw
Code:ap129tw
Price:
$67.32
Quantity in Basket: none
|
• Ideal for body shop repair, muffler and exhaust work
• Adjustable blade guide increases blade life
• Cuts all types of aluminum, plastic, fiberglass and sheet metal
• Versatile; cuts intricate shapes and tight radius curves on flat and curved surfaces
Specifications:
Cutting capacity (stock thickness): 1.5 mm
Overall length: 8-1/2" (216 mm)
Net weight: 2lbs. (.9 kg)
Piston stroke: 1/4"
Strokes per minute: 10,000
Air inlet thread: 1/4"
Average air consumption: 7 CFM
Working air pressure: 90-120 PSI
|
|
|
|
|
 | Kett K200 Metal Shear
Code:KETKD200ms
Price:
$193.50
Quantity in Basket: none
|
| This tool makes smooth even cuts without warping the edges. We've been using one of these for over 10 years and it still performs flawlessly. |
|
|
|
|
 | HTP Hole Punch Flange Tool
Code:HTP12005a
Price:
$109.95
Quantity in Basket: none
|
| This is a professionally built tool for punching holes and flanging metal in order to weld two panels together properly. |
|
|
|
|
 | Heavy Duty Zip Gun® Hammer with 4 Chisels
Code:CP715K
Price:
$77.95
Quantity in Basket: none
|
| • Most powerful air chisel hammer in its class
• Longer piston strokes for more force per blow
• Integral muffler minimizes exhaust sound
• Applications: rivet and bolt cutting, bushing driving and overall front end work
• 2100 blows per minute
• Includes 4 commonly needed chisels
Specifications:
Shank Opening (In.): .401
Piston Stroke (In.): 3-1/2
Average Air Consumption CFM: 4-1/2
Air Inlet NPTF (In.): 1/4
Blows Per min @ 90 PSI: 2100 |
|
|
|
