Pulling

From small Come-A-Long type tools (pictured below) to heavier duty "Pull Posts", clamps and other pulling equipment.

	Winch Puller 2-Ton, 6' Lift - Come-A-Long Code:AME72Aw Price: $49.95 Quantity in Basket: none
The uses are endless for this versatile American Power Pull model. Whatever the project, stretching, pulling, lifting, lowering. • 2-Ton load capacity with 36:1 leverage and 2:1 safety factor (4:1 safety factor at 1-Ton) • 6' lift capacity • Premium 3/16" Galvanized Aircraft Cable • Incorporates a pulley block for greater pulling power • One piece pulley block wheels for longer cable life • Solid gearing and heavy-duty frame and handle assembly make this 'come a long' the choice for both professionals and DIYers. • Padded comfortable padded grip • Made in the U.S.A.
	Jackco Pulling 10 Ton Tower Code:JAC892 Price: $725.00 Quantity in Basket: none
We finally got a good 10 ton pulling post by an excellent manufacturer. This post is very similar other towers but is much less expensive so it's within the reach of the small shop owner. Chain needs to be purchased separately. This item is shipped via truck freight from California.
	Hydraulic Pump - Air Powered Foot Peddle Code:JAC842 Price: $265.00 Quantity in Basket: none
• Equipped with a 1600 c.c. reservoir. • Designed to work with large diameter or multiple hydraulic cylinders. • Aluminum alloy reservoir for light weight and durability. Rated Pressure 10,000 psi (700 bar) Air Pressure 90-120 psi (6-8 bar) Usable Oil Capacity 97 cu. in. (1600 c.c) Dimension (L x W x H) 10 in. (255 mm) x 5.6 in. (141 mm) x 8.3 in. (210mm)
	HS Glue Puller Dent Removal Kit Code:HS7500W Price: $289.50 Quantity in Basket: none
*The 7500 Glue Puller is designed to let you lever out dents from a panel without damaging the paint. *No holes to drill, no interior panels to remove. *Works on panels where conventional tools don't reach. *Not limited by unseen restrictions behind panel.
	Slugger Bodyman's Slide Hammer w/ Organizer Board Code:TA81000W Price: $144.95 Quantity in Basket: none
• 10 lb. slide weight designed for in-line impact. Balanced for continued use without fatigue. • Special hand-fit weight for ease of work. • The most complete set available! 10 of the latest and most modern engineered body pulling and pushing attachments. Consists of 16 different parts. • Dual hammer action for reverse or direct reconstruction blows. • Quick assembly for applied hook-ups on fender edges, bumper ends, rocker panels, aligning doors and door edges, hoods and hood hinges, trunk and trunk hinges, headlights and many more applications. • Rubberized hand-hold for good grip and safety. • All parts easily stored on permanent board. • Supplied with exclusive lock nut to keep attachments from rotating
	Muscle Max 10 lb. Heavy-duty Dent Puller Set Code:ATD5160 Price: $84.50 Quantity in Basket: none
Contains: • 10 lbs. hammer • (2) Pipes • (1) 2-hole pipe • (1) Hex nut • (1) Chain and hook • (5) Plates • Molded storage case included
	MO Deep Hook Set w/ 2 Pull Pads Code:MO6400 Price: $201.15 Quantity in Basket: none
Set [6” (152mm) throat depth; 14” (356mm) throat opening] For fast hook-ups on cowls, door posts and trunk openings, or to reach into cramped places. Small bracket 2” wide (51mm), 3” deep (76mm) and large bracket 2” wide (51mm), 9” deep (228mm) are included in sets. Specifications: Overall length: 19” (482 mm) Weight: 19 lbs. (8.62 kg) Capacity 5 tons (4,536 kg)
	MO 'B' Body Clamp Code:MO100W Price: $96.20 Quantity in Basket: none
Self-Tightening. The bodyman’s right arm. It grabs 2 1/4” (57 mm) of metal, making it ideal for hard pulls on heavy metal or frame. Original wedge. Original straight cut tooth design. Specifications: Gripping surface: 2 1/4” wide (57 mm), 1” deep (25 mm) • Overall length: 9 1/2” (241 mm) Weight: 7 lbs. (3.18 kg) • Capacity: 6 tons (5,443 kg)
	MO 'C' Type Body Clamp Code:MO200W Price: $96.20 Quantity in Basket: none
Self-tightening. Its 1 1/2” (39 mm) throat clearance fits over a flange or frame horn, or around a lip to pull from behind. Original wedge. Original straight cut tooth design. Specifications: Gripping surface: 2” wide (50 mm), 5/8” deep (16 mm) Overall length: 8 1/2” (215 mm) Weight: 7 lbs. (3.18 kg) Capacity: 6 tons (5,443 kg)
	MO 'JR' Body Clamp Code:MO300W Price: $83.42 Quantity in Basket: none
One of Mo-Clamp’s original self-tightening clamps. A must for every bodyman. 1 1/2” wide bite for aggressive pulling. Original wedge. New angled tooth design. Specifications: Gripping surface: 1 1/2” wide (38 mm), 3/4” deep (19 mm) Overall length: 9” (229 mm) Weight: 5 lbs. (2.27 kg) Capacity: 5 tons (4,536 kg)
	MO Sheet Metal Hook Set of 5 Code:MO3100W Price: $170.00 Quantity in Basket: none
Alloy heat-treated hooks increase pulling options. May be used with Hole Pull Plates (#0810 & #0820) to pull, or use in combination with clamps. Includes one each: #3110, #3120, #3130, #3140. Specifications: Weight approximately 2 lbs. each (.91 kg) Capacity: 2 tons (1,814 kg)
	MO Uni Body Clamp Code:MO4010W Price: $175.86 Quantity in Basket: none
Bar holes designed for three ways of pulling, using Shackle (#4044) and Oval Loop (#4043). Clamp has recessed pockets to hold bolts stationary for easy tightening. Specifications: Gripping surface: 8” wide (203 mm), 3/4” deep (19 mm) Overall length: 14 1/2” (368 mm) Weight: 19 lbs. (8.62 kg) Capacity: 5 tons (4,536 kg)
	MO Double Claw Hook (MSRP $32.89)) Code:MO4120W Price: $36.58 Quantity in Basket: none
For use as a chain shortener, chain connector or double hook. Designed for use with 3/8” chain. Specifications: Overall length: 5” (127 mm) Weight: 2 lbs. (.91 kg) Capacity: 7 tons (6,350 kg)
	MO Welded Double Clevis Hook Code:MO4145W Price: $40.88 Quantity in Basket: none
For easy 3/8” chain connection. Another time saving tool. Specifications: Overall length: 8 3/4” (222 mm) Weight: 3 lbs. (1.36 kg) Capacity: 10 tons (9,072 kg)
	MO Grab/Slip Hook Combo Code:MO4146W Price: $42.88 Quantity in Basket: none
Grab hook on one end; slip hook on the other. For hooking into clamps or pull rings. Fast hook-up to any section of 3/8” chain. Specifications: Overall length: 9 1/2” (241 mm) Weight: 3 lbs. (1.36 kg) Capacity: 7 tons (6,350 kg)
	MO Twin Claw Clamp Code:MO440W Price: $101.72 Quantity in Basket: none
The "Twin Claw" TM self-tightening clamp is a 7 ton rated tool for very tough pulls. Made of MoClampฎ Tru-Tuff, heat-treated steel alloy. The jaws and dropped forged pulling wedge distribute the clamping load – reducing the possibility of metal tearing. Specifications: Overall length: 8" (203 mm) Weight: 8 lbs. (3.63 kg) Height: 3" (76 mm) Capacity: 7 tons (6,356 kg)
	MO Swivel Body Clamp Code:MO480W Price: $110.63 Quantity in Basket: none
The 135ฐ Swivel Clamp provides multi-angle pulling from a single clamp. Using MoClamp's severe duty angled tooth design, this allows the drop forged round wedge to move within the clamp's channel to provide the exact angle of pull needed – while allowing it to pivot to avoid twists in the chain. Specifications: Overall length: 5" (127mm) Weight: 5.7 lbs. (2.6 kg) Capacity: 10 tons (9,080 kg)
	MO Door Post Puller/Twister Code:MO5616W Price: $45.79 Quantity in Basket: none
Designed to put a twist in your pull with its V-shaped gusset. There are three positions from which to pull. For use on bolt-type hinge pillars. Specifications: Overall length: 5 1/4” (133 mm) Slots: 1/2” x 1 1/2” (12 mm x 39 mm) Weight: 2 lbs. (.91 kg) Capacity: 2 tons (1,814 kg)
	MO Clamp Tack-N-Pull with pull plates Code:MO800 Price: $82.00 Quantity in Basket: none
For hard-to-hold pulls. Tack weld one of the reusable plates. Attach clamp and pull. Break tack weld with a grinding cut-off wheel or cutting torch. Includes two 3” plates, two 1 1/2” plates, and two 1” plates. Replacement plates available in the MO 805 plate kit.
	Slide Hammer/Dent Puller Code:TA81400 Price: $27.35 Quantity in Basket: none
The largest selling and most economical body shop dent puller in the industry. 3lb. slide weight is mounted on 12" plated steel shaft. Famous blue vinyl hand grip over steel handle reduces sting on technicnian's hands and provides 100% grip. Broached hex in nose cone locks pulling screw in place...ends breakage. Supplied with two hardened pulling screws and "L" puller hook fabricated of aircraft quality steel. Nose cone and shaft threads are 1/2"-20.
	Better Slide Hammer/Dent Puller Code:TA81200 Price: $46.10 Quantity in Basket: none
Provides excellent balance with 5lb. slide weight on plated, solid, 5/8" shaft. Exclusive soft cushion vinyl grip with "Hang-It" hole absorbs shock. Broached nose cone locks puller screw firmly in place. Supplied with body hook of heavy duty aircraft steel for pulling out curled and creased edges and panels. Helps in aligning hood and trunk hinges. Heavy duty puller screw is extra long. Designed for that in-between job where the 10 lb. Slugger slide weight is too heavy and the pullers with 3 lb. weights are too light. Nose cone and shaft threads are 5/8"-18.
	Best Multi Use Dent Puller/Slide Hammer Set Code:OTC7948w Price: $221.40 Quantity in Basket: none
Includes: Slide hammer with 5 lb. hammer, rear axle pulling attachment, 3-way cross head, cone, 2-way cross block, puller hook attachment, pulling jaws(3) for internal or external pulling jobs, puller hook attachment, grip wrench adapter with single lead (wrench not included), dent puller attachment, internal/external pulling jaws (3) 6-1/2", internal puller jaws (3) 2-3/8", front hub puller assembly, forcing screw, sleeve, and blow molded case.
	HS Unispotter #5500 Stinger Code:HS5500wa Price: $379.95 Quantity in Basket: none
This Kit Includes *5590 Stud Gun *1016 Deluxe Slide Hammer *1004 Stud Tip *1005 Molding Rivet Tip *1007 Shrink Tip *1040 Eliminator *1095 Mini Puller ("T" handle") *1000 Blackhead Studs *1001 Flexpert Studs *1003 Molding Rivets *2 Year Manufacturer's Warranty *Molded Storage Box Model Number 5500

 

 

---

http://www.autobodystore.com/