NOTE: Login for this store is separate than the Forum Login.
You must register for the Store and the Forum separately.

Login Here


Body Shop
Paint Shop
Spray Guns
DeVilbiss
Iwata Spray Guns
Sharpe Spray Guns
Sagola Spray Guns
Turbine-Powered Spraying Sytems
Less Expensive Spray Equipment
Preval
Spray Gun Accessories
Special Spray Guns
Supplied Air Breathing Systems
Other Protection
Surface Preparation
Masking
Compounding & Polishing
Paint Shop Helpers
Rust Coatings and Converters
Detailing and Care
General Shop Tools
Videos
Specials!
Return Policy
Contact Information
International Shipping Policy
Supporting Friends



Sagola Spray Guns




Sagola 4500  Xtreme (Click Picture for Options) Sagola 4500 Xtreme (Click Picture for Options)
Code: SAG4500
Price: $0.00
Quantity in Basket: none
For metallic, pearls or high gloss the Sagola 4500 is one of the best guns on the market
The 4500 has a revolutionary air distribution system.
Machined so well there are no soft parts between air and liquids.
New aluminum air caps for high solids and waterborne paints. When using the 4500 the maximum recommended air pressure of 29 PSI this gun will use different amount of air based on which air cap you have ordered.

This gun comes with a 600ml plastic cup, wrench and brush.

Fluid tip and Air Cap usage

For clear and single stage Sagola recommends a 1.3XL with the LXT Clear Cap
If the clear or single stage paint is a little heavier the 1.4 with the LXT Clear Cap may be best.
Waterbased and waterborne paint products are sprayed using the Aqua air cap.
The HVLP air cap is mostly used for spraying solvent base coats.
The LXT01 is a multipurpose air cap.

Air Consumption

The air consumption (CFM) can be reduced if you lower the inlet pressure but at 29 PSI the air usage is as follows
With the HVLP Air cap this gun will use approximately 14 CFM of air
With the Clear Coat cap it will use approximately 11 CFM
With the Aqua cap it will use approximately 9 CFM
With the LXT01 cap it will use approximately 9 CFM

 
 



Sagola 4500 Parts Sagola 4500 Parts
Code: SAG4500Parts
Price: $0.00
Quantity in Basket: none
 
 



Sagola 3300 Pro $244.50 Click Picture for Options Sagola 3300 Pro $244.50 Click Picture for Options
Code: SAG3300-
Price: $0.00
Quantity in Basket: none
> Light body. Injected aluminium.
> New design, maximum ergonomics.
> High Quality Chrome.
> Total absence of gaskets between air and paint.
> Top-of-the-range aluminium aircaps.
> Stainless steel nozzles and needles.
> Meets the most demanding solvent emissions standards.
 
 



Sagola 3300 Parts Sagola 3300 Parts
Code: SAG3300Parts
Price: $0.00
Quantity in Basket: none
 
 



Sagola Hand Tighten Air Flow Regulator Sagola Hand Tighten Air Flow Regulator
Code: SAG56418020
Price: $97.40
Quantity in Basket: none
Accurately measure your air inlet pressure.
Installs and removes easily by hand, no tools required.
 
 



Sagola Mini Xtreme $322.00 Sagola Mini Xtreme $322.00
Code: SAGMINI
Price: $0.00
Quantity in Basket: none
For blending and spotting or painting small to medium size parts there is no better gun.

Weight with cup: 437 g >Dimensions with cup: 26 x 16 x 7 cm
>Air inlet couplings: 1/4
>Cup capacity: 125 ml
>Maximum recommended inlet pressure (working pressure): 28 PSI
>Maximum recommended application distance: --5 to 7 inches
>Maximum paint flow output (nozzle 1.0, viscosity16):
Mini AQUA: 3.9 oz/min
Mini HVLP: 3.7 oz/min
>Air consumption (28 PSI inlet): Mini AQUA: 6.7CFM Mini HVLP: 10 CFM
>Average sound pressure level: 81dB

 
 



Sagola Mini Extreme Parts (Click Picture) Sagola Mini Extreme Parts (Click Picture)
Code: SAG-MINI-Parts
Price: $0.00
Quantity in Basket: none
Click Picture for Options
 
 



Sagola 4100 GTO Spray Gun $299.00 Sagola 4100 GTO Spray Gun $299.00
Code: SAG4100GTO
Price: $0.00
Quantity in Basket: none
Comes with 650ml Plastic Cup. A new body with ergonomic design creates an enviable balance and ease of use with a reduced weight. With this model SAGOLA offers the widest range of solutions for all the refinishing sector needs. The New 4100 GTO is launched with the highest SAGOLA manufacturing standards, competitive prices whilst maintaining a superb service and offering the best warranty (3 years). All this with the strict compliance with the most demanding regulations concerming solvent emissions, with GTO TECH and GTO HVLP systems.
 
 



Sagola Classic Pro HVLP Primer Gun w/1.8 fluid tip and HVLP Cap Sagola Classic Pro HVLP Primer Gun w/1.8 fluid tip and HVLP Cap
Code: SAG10141610
Price: $189.50
Quantity in Basket: none
New body, maximum ergonomics
Single shaft design, less parts
Minimum overspray
High speed
Low air consumption
Maximum robustness and reliability
The best price/quality ratio in primer spray guns.
Light body made of injected aluminium.
Single shaft design, less parts.
Nozzle + Needle made of stainless steel.
Single piece paint packing gland.
No O-rings. Uses 12 CFM at 29 PSI