Stud Welders

Pulling out the dents
 without damaging the sheetmetal.

	HS UniSpotter#9000 Deluxe (pro model) Code:HS9000W Price: $456.95 Quantity in Basket: none
Kit Includes *9090 (heavy duty) Stud Gun *1016 Deluxe Slide Hammer *1004 Stud Tip *1005 Molding Rivet Tip *1007 Shrink Tip *1040 Eliminator Side-By-Side adapter with Extend-A-Tip *1095 Mini Puller *1000 Blackhead Studs *1001 Flexpert Studs *1002 2.6mm Heavy Weight Studs *1003 Molding Rivets *2 Year Manufacturer's Warranty All packaged in a custom designed tool box. Model Number 9000
	HS UniSpotter #5500 Stinger Code:HS5500W Price: $379.95 Quantity in Basket: none
This Kit Includes *5590 Stud Gun *1016 Deluxe Slide Hammer *1004 Stud Tip *1005 Molding Rivet Tip *1007 Shrink Tip *1040 Eliminator *1095 Mini Puller ("T" handle") *1000 Blackhead Studs *1001 Flexpert Studs *1003 Molding Rivets *2 Year Manufacturer's Warranty *Molded Storage Box Model Number 5500
	HS 4550 Unispotter Starter "Plus" Stud Welder Kit Code:HS4550 Price: $214.95 Quantity in Basket: none
This kit comes with... *Upgraded 4550 Starter Kit w/ Exclusive Stud Ease Technology *Upgraded 1016 T-Handle slide hammer. *Package of 500 Flexpert welding studs *Most powerful lightweight stud gun available *Built in overload protection *Grounded 3-wire cable with 2 year limited warranty and lifetime transformer warranty
	Unispotter 5500 European - 220 Model - SPECIAL ORDER ITEM Code:uni550022050 Price: $406.35 Quantity in Basket: none
This is the same as the HS5500 Stinger except that it designed to be used on a 220/European circuit. Comes without specific plug configuration. 220 Volt 50 Watts.
	2.2mm Flexpert Studs Code:HS1001W Price: $12.60 Quantity in Basket: none
Box of 500 Studs
	2.6 mm Heavyweight Studs Code:HS1002W Price: $13.95 Quantity in Basket: none
Box of 500 Studs
	Stud Welder Tip Code:HS1004W Price: $9.95 Quantity in Basket: none
Replacement tip for stud welding.
	Uni Spotter Shrink Tip Code:HS1007 Price: $9.95 Quantity in Basket: none
The stud welder tip pulls out and can be replace with this tip for shrinking sheetmetal easily.
	Uni Spotter Mini Puller Code:HS1095 Price: $36.85 Quantity in Basket: none
This is very handy for fine tuning your dents and give much more control than a slide hammer for pulling small dents out of sheet metal. We actually use this tool much more than the slide hammer.
	HS Unispotter Twist Lock Slide Hammer Code:HS1016 Price: $110.55 Quantity in Basket: none
This is the best slide hammer for stud pulling that we've found. This hammer locks onto any 2.2 and 2.6 stud easily and doesn't cover up a lot of the surrounding metal like other slide hammers which makes it easy to tap the metal down close to the pulling action. Built to last.
	Uni Spotter Slide Hammer Repair Kit Code:HS1028 Price: $28.65 Quantity in Basket: none
	HS Uni-Clamp Mutiple Stud Puller Code:HS1080 Price: $102.35 Quantity in Basket: none
Used with a pulling device this clamp gives you the ability to pull on several studs at the same time.
	HS Side-By-Side Adaptor Kit Code:HS1040 Price: $39.95 Quantity in Basket: none
This kit is inserted on the stud gun and allows you to place pulling studs close so that they can be pulled with a clamp.
	Uni-Wire Kit Code:HS2120 Price: $159.95 Quantity in Basket: none
• STUD EASE Technology holds stud in welder for easy out-of-position welding and is exclusive to UNI-SPOTTER Stud Welders • Increase accuracy when pulling small studs • Weld studs easier and faster • Works with all Uni-Spotter Stud Welders • Welds quickly and easily. Ideal for creases and large dents. Set Contains: • Conversion Tip Kit • 9-Finger Claw • 4-Finger Claw • 1/2 lb. Uni-Wire
	HS Glue Puller Dent Removal Kit Code:HS7500 Price: $289.50 Quantity in Basket: none
The efficient way to remove dents without damaging paint. The 7500 is designed to let you lever out dents from the panel surface. No holes to drill, no interior to be removed. • Works on panels were conventional tools will not reach • Dual lever action for even weight distribution while pulling • Includes: Lightweight dual lever dent puller two sizes of pulling knobs two strengths of specialized glue nylon knockdown for finishing work professional glue gun, blow molded case.
	Dent Fix MAXI 220V Dent Pulling Station Code:DFXDF505 Price: $1,155.00 Quantity in Basket: none
THE MAXI is a 220 volt single phase dent pulling station that provides the technician with the power they need to shrink, pull rocker panels, hail damage, creases, dents in hard to access areas. The efficiency of this tool increases the workers productivity while producing a cleaner, better repair. THE MAXI takes the idea of a stud welder much further, this versatile tool will: • Weld pins • Weld a slide hammer directly to the panel • Weld a light pulling rod • Weld wiggle wire for even crease pulling • Weld a rod for leverage pulling • Shrink metal Complete kit includes: “The Maxi” 220 volt unit, two light pulling rods, two slide hammer rods with strike weight, stud pin electrode, shrinking electrode, wiggle wire weld tip, a nine and four finger “Bear Claw”, 500 stud weld pins, 1 pound of wiggle wire, 21 feet of power cable, and nine feet of welding cable.
	Unispotter Molding Rivet Studs (500 per box) Code:UNI1003 Price: $14.95 Quantity in Basket: none
Used with your stud welder and the molding rivet tip.
	Molding Rivet Tip Code:UNI1005 Price: $17.50 Quantity in Basket: none
Easily installed molding rivet tip for stud gun.
	Steck Stud Puller with Straight Edge Code:STK20014 Price: $39.95 Quantity in Basket: none
• Quickly grip studs (pull pins) and controlling the dent pulling process as well as accuracy of the pull. • Value Proposition: Strong reinforced Nylon lever with pivoting base and self-locking stud capture mechanism allows the technician to quickly lock and lever studs while also compressing the crown area of the dent with the pivoting base. Adjustable pivot base on the Stud Lever allows one-handed operation and provides increased leverage, accuracy and reach for the pull and crown compression processes both vertical and horizontal, including roofs and lower rocker panels. Stud Lever’s unique stud capture mechanism allows technician to quickly and easily capture both 2.2mm and 2.6mm studs as close as 3/8 inches apart. Included with the Stud Lever is the Steck Straight Edge, STK- 20003, which allows the technician to align the stud pull with the non-damaged metal area for accurate pulls on the initial pull which minimizes metal work and reduces the need for slide hammers.

 

 

---

http://www.autobodystore.com/